The SmallRig Cold Shoe Mount review is for camera users who want a straightforward way to add a shoe attachment point to a rig with compatible threaded holes.
This two-piece aluminum set includes mounting screws and hex spanners, with clear limits for certain gimbals and cage setups.
SmallRig Cold Shoe Mount Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical fit for camera builders who need to add a microphone, flash, or LED to a compatible cage, handle, or plate.
- Two cold shoe mounts are included.
- Each mount measures 25 × 25 mm and is made from aluminum alloy.
- The kit includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
- Mounting options are described for accessories with compatible 1/4-inch or M2.5 threaded holes.
Pros
- The two-piece set can add shoe mounting points to compatible camera rig accessories.
- Includes both 1/4-inch-20 and M2.5 screws, plus hex spanners.
Consider before buying
- It is not suitable for DJI or ZHIYUN gimbals.
- SmallRig Full Cage 1661 has a specific mounting note; buyers with that cage should confirm the required setup before assembly.
Read the full review summary
The SmallRig Cold Shoe Mount 2060 focuses on a useful job: adding a cold shoe to a cage, handle, plate, or other accessory with compatible 1/4-inch or M2.5 threaded holes.
The pair of mounts, two screw types, and included spanners provide some flexibility for assembling a compact camera rig.
It suits creators who already have a compatible mounting surface and want to attach a microphone, flash, or LED accessory.
Its fixed shoe position favors simple mounting over angle adjustment, and buyers should check their cage model and intended mounting point before ordering.
The buying factors
SmallRig Cold Shoe Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting versatility
The mount can attach to compatible 1/4-inch or M2.5 threaded holes, with screws for the supported setups.
Accessory usefulness
It provides a cold shoe for a microphone, flash, or LED on a camera accessory.
Pack value
Two mounts and the required screw types and spanners are included.
Setup clarity
Surface arrows indicate mounting direction, and the kit includes the tools needed for installation.
Positioning flexibility
The mount provides a fixed shoe position; the description does not identify an angle-adjustment mechanism.
Rig compatibility
It works with compatible threaded mounting points, but is not suitable for DJI or ZHIYUN gimbals and has a noted exception for SmallRig Full Cage 1661.
Key Features and Specifications of SmallRig Cold Shoe Mount
- Two cold shoe mounts are included.
- Each mount measures 25 × 25 mm and is made from aluminum alloy.
- The kit includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
- Mounting options are described for accessories with compatible 1/4-inch or M2.5 threaded holes.
- The shoe is designed to hold a microphone, flash, or LED on camera accessories such as cages, handles, and plates.
- White arrows show mounting direction, and bent bevels at one end help resist accidental removal.
Pros and Cons of SmallRig Cold Shoe Mount
Pros
- The two-piece set can add shoe mounting points to compatible camera rig accessories.
- Includes both 1/4-inch-20 and M2.5 screws, plus hex spanners.
- Compact 25 × 25 mm footprint and aluminum alloy construction.
- Mounting arrows make the intended direction easier to identify.
Consider before buying
- It is not suitable for DJI or ZHIYUN gimbals.
- SmallRig Full Cage 1661 has a specific mounting note; buyers with that cage should confirm the required setup before assembly.
- This is a fixed shoe mount, so choose another style if you need to reposition an accessory by tilting or rotating it.
Who Should Buy SmallRig Cold Shoe Mount?
Good fit
Consider the 2060 if you need a simple shoe point for a microphone, flash, or LED and already have a cage, handle, plate, or other accessory with compatible threaded holes.
The included screws and spanners make it a useful small kit for building out a rig.
Before buying, check the thread size and mounting instructions for the exact accessory you plan to use.
The product is not intended for DJI or ZHIYUN gimbals, and its cage-specific note makes checking fit particularly useful for owners of SmallRig Full Cage 1661.
Who should skip it
Skip this mount if your setup depends on a DJI or ZHIYUN gimbal, or if you need a shoe that tilts or rotates to change an accessory's angle.
Confirm the mounting point and thread requirements before choosing it for any other rig.
How the SmallRig Cold Shoe Mount Fits Into a Camera Rig
A small mounting point for threaded accessories
The 25 × 25 mm footprint is suited to adding a shoe to a mounting surface that already has a compatible threaded hole.
That makes it a targeted rig-building part rather than a stand-alone support: the cage, handle, or plate determines where the accessory sits.
Two screw types broaden setup options
The package includes 1/4-inch-20 and M2.5 screws, which align with the mounting options described for this mount.
Check the actual hole and the accessory's installation guidance before fastening; for most cages, the supplied note says to use the 1/4-inch-20 screw, while SmallRig Full Cage 1661 is an exception.
Fixed placement keeps the design simple
Once installed, the shoe gives a microphone, flash, or LED a mounting point, while the position is determined by the accessory surface and how the mount is oriented.
If your framing or lighting setup requires frequent angle changes, consider a mount designed with an adjustable joint.
Check the rig before ordering
The stated compatibility covers threaded camera accessories such as cages, cold shoe blocks, handles, and plates.
Gimbals from DJI and ZHIYUN are expressly excluded, so buyers should make sure the mount is going on a suitable accessory rather than assuming any camera support will work.
Alternatives to SmallRig Cold Shoe Mount
Camera Flash Shoe Mounts alternative

1,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Adapter 1135
Choose the 2060 for a pair of simple fixed mounting points on compatible threaded surfaces.
The 1135 is a closer fit if you need to change an accessory's angle, while its stated maximum recommendation is 1 kg and its description advises against monitors or LED lights over 1.0 kg.
- The 1135 uses a double ball head that rotates up to 180 degrees and secures with a side wingnut.
- It includes a shoe base and is intended for a monitor, small action camera, LED, microphone, or flash.
- The 2060 adds a fixed cold shoe mount to compatible threaded camera accessories and comes as a two-piece set.
Camera Flash Shoe Mounts alternative

700+ ratings
Read Amazon ReviewsSmallRig Mini Ball Head Cold Shoe Mount 3577
The 2060 suits buyers who want two fixed shoe points on compatible threaded accessories. Consider the 3577 if you prefer a lightweight, angle-adjustable mount and your accessory falls within its 250 g support limit.
- The 3577 is a single mini ball head mount that tilts up to 138 degrees, weighs 20 g, and supports devices up to 250 g.
- Its base attaches via a cold shoe adapter, and it has a 1/4-inch screw on top.
- The 2060 is a two-piece fixed shoe set for mounting on compatible threaded holes, with screws and spanners included.
Is SmallRig Cold Shoe Mount Worth It?
The SmallRig Cold Shoe Mount 2060 is worth considering when you need a compact, fixed shoe point for compatible camera rig accessories.
Its two-mount package and included hardware make it a practical option for adding a microphone, flash, or LED to a threaded cage, handle, or plate.
Confirm the thread and mounting instructions for your specific rig before buying, and avoid it for DJI or ZHIYUN gimbals. If angle adjustment matters, select a ball-head style mount instead.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical fit for camera builders who need to add a microphone, flash, or LED to a compatible cage, handle, or plate.
- Two cold shoe mounts are included.
- Each mount measures 25 × 25 mm and is made from aluminum alloy.
- The kit includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
- Mounting options are described for accessories with compatible 1/4-inch or M2.5 threaded holes.