This SmallRig Super Clamp review looks at a simple way to add a mounting point to a compatible bar, shelf edge, or other support.
Its adjustable jaw, protective pads, and 1/4-inch and 3/8-inch threads make it most appealing to camera users who already know where and how they want to position an accessory.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera builders who need a padded grip on a suitable support and threaded points for accessories.
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
- Includes 1/4-inch and 3/8-inch threaded holes for attaching compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads at the clamp contact points are intended to help prevent slipping and scratching.
Pros
- Two common thread sizes make it adaptable to compatible camera accessories.
- The jaw range suits supports between 15 mm and about 40 mm thick.
Consider before buying
- The jaw range rules out supports that are thinner than 15 mm or thicker than about 40 mm.
- The 3.3-pound maximum recommendation is not a guarantee for every mounting angle, surface, or moving setup.
Read the full review summary
The clamp combines an adjustable jaw with threaded accessory points, giving a camera-rig builder a flexible attachment point without requiring a dedicated camera cage or stand.
Its aluminum alloy and stainless steel construction is paired with rubber pads intended to help limit slipping and scratching at the contact surfaces.
It is best suited to lightweight, deliberately positioned accessories on a support that falls within the jaw's stated opening range.
Buyers should check the support's thickness, the accessory's thread, and the intended load before choosing it; the product information lists a maximum weight recommendation of 3.3 pounds, but does not describe a particular setup or use condition for that figure.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp is designed to attach to a range of supports and includes both 1/4-inch and 3/8-inch threaded holes for accessories.
Jaw range
The stated 15–40 mm range accommodates many modest support thicknesses, though buyers need to measure their mounting point first.
Accessory compatibility
Two thread sizes offer useful options for attaching compatible camera accessories.
Contact protection
Rubber pads are intended to reduce slipping and surface scratches where the clamp grips.
Rigging weight guidance
A maximum recommendation is supplied, but buyers should account for their full setup and mounting conditions.
Portability
At 0.13 kg and described as compact when folded, it is easy to consider for a portable camera kit.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
- Includes 1/4-inch and 3/8-inch threaded holes for attaching compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads at the clamp contact points are intended to help prevent slipping and scratching.
- Listed maximum weight recommendation is 3.3 pounds.
- The package includes one super clamp; listed item weight is 0.13 kg.
Pros and Cons of SmallRig Super Clamp
Pros
- Two common thread sizes make it adaptable to compatible camera accessories.
- The jaw range suits supports between 15 mm and about 40 mm thick.
- Rubber contact pads offer a measure of protection for the clamped surface.
- Aluminum alloy and stainless steel construction keeps the design compact and relatively light.
Consider before buying
- The jaw range rules out supports that are thinner than 15 mm or thicker than about 40 mm.
- The 3.3-pound maximum recommendation is not a guarantee for every mounting angle, surface, or moving setup.
- The clamp is not water resistant, so it is not a natural choice for wet environments.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider it if your camera setup needs a compact clamp-on attachment point for a compatible light, camera, or other accessory.
The two threaded sizes provide options for connecting gear, while the adjustable jaw can grip a support within its stated range.
Before buying, measure the support where you plan to mount it and confirm that the accessory's connection matches one of the clamp's threads.
Keep the complete setup within the stated weight recommendation and consider how leverage or movement may affect the grip in your specific arrangement.
Who should skip it
Skip it if your support is outside the 15–40 mm jaw range, or if your intended equipment exceeds the stated maximum weight recommendation. For a wet location, choose a mounting option with water resistance suited to that environment.
How the SmallRig Super Clamp Fits a Camera Rig
Check the support before planning the rig
The jaw's approximate 15 mm minimum and 40 mm maximum opening are the first practical limits to check.
Measure the actual bar, shelf edge, or other support at the point where the clamp will sit; nearby joints, curves, or obstructions can affect whether it can be placed as intended.
Thread options help with accessory planning
The 1/4-inch and 3/8-inch threaded holes give the clamp more than one path for adding compatible accessories.
Confirm the connection on each piece of gear before building around the clamp, and account for the direction the accessory will extend from its mounting point.
Pads protect the contact area
Rubber pads are intended to improve grip while helping prevent scratches on the surface being clamped.
They are useful design details, though the actual hold depends on the support and setup, so position the clamp carefully and check that it is secure before relying on the mounted equipment.
Treat the weight guidance as a setup limit
The listed maximum weight recommendation is 3.3 pounds.
That gives buyers a useful reference when assessing a camera accessory, but the weight alone cannot describe every mounting arrangement; a long accessory or one exposed to movement may place different demands on the clamp than a compact, close-mounted item.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Choose the Super Clamp when you want a compact clamp and plan to supply a compatible accessory connection separately. Consider the kit when you need an included articulating arm and a wider stated jaw opening.
- This kit includes a clamp and a 9.8-inch articulating arm with 1/4-inch screws at both ends; its jaw range is 15–54 mm and its ball-head design supports 360-degree adjustment.
- The SmallRig Super Clamp provides a clamp with 1/4-inch and 3/8-inch threaded holes, but its supplied package is one clamp.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Double Clamp Mount
The single clamp is the simpler option when one attachment point is enough. Consider the double-clamp model when your setup needs two clamping points around a rod or other support and its specified diameter range fits.
- This model uses two clamps, supports 360-degree rotation, and is designed for rods with diameters from 14 mm to 60 mm; its listed maximum load capacity is 3.5 kg.
- The SmallRig Super Clamp is a single clamp with a jaw opening of about 15–40 mm and two accessory thread sizes.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering for camera users who need a compact way to attach compatible accessories to a support within its 15–40 mm jaw range.
The threaded holes and protective pads make it a flexible rigging component, while its light weight suits a portable kit.
Measure the mounting point, verify the accessory connection, and keep the setup within the stated 3.3-pound maximum recommendation. If your support or rigging needs fall outside those limits, a different mounting arrangement will be a better fit.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera builders who need a padded grip on a suitable support and threaded points for accessories.
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
- Includes 1/4-inch and 3/8-inch threaded holes for attaching compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads at the clamp contact points are intended to help prevent slipping and scratching.